Garlando Football Table G-500 Weatherproof blue with retracting temples

Garlando Football Table G-500 Weatherproof blue with retracting temples‌

Cabinet built in multilayer marine plywood covered in plastic laminate, both water resistant and glued together with a special non water-soluble glue. The thickness of 3 centimeters makes the structure practically indestructible. Mobile choice in red with yellow or blue decorations with wood grain effect. LEGS in metal with black peel effect epoxy powder coating, resistant to rain. The considerable dimensions (9 x 9 cm) guarantee the necessary stability on the ground. AUCTIONS diameter mm. 16 in drawn steel with high torsion resistance with rustproof chrome plating. The quality of the material used, together with the thickness of 2.2 mm, prevents the rods from bending, maintaining a perfect shape for a long time. It is possible to choose between outgoing rods and retracting rods (telescopic). The special triple-layer chrome plating to which both the outgoing rods and the telescopic safety rods are subjected contrasts the formation of rust even after years in which the football table is subjected to bad weather. Outgoing rods: the rods supplied as standard come out of the cabinet - on the side opposite the knob - according to the standard used in Italy and in international competitions. Safety device for the rods (telescopic rods): on request it is possible to supply the football table with telescopic safety rods to replace the outgoing ones. Made of the same material and with the same technical characteristics as the outgoing ones, they differ in operation, which ensures the highest level of safety. In fact, in the telescopic rods, a rod with a smaller diameter slides inside the rod with the cairns, the end of which re-enters the cabinet without coming out, thus avoiding the danger of blows to the face and eyes of children. The choice is strongly recommended if the users of the table football are children and in any case in all cases where the table football is used in environments frequented by children. The rods are fixed to the cabinet by means of nylon bushings. The steel BALL BEARINGS inside the bushings greatly improve the smoothness of the rods: it increases the speed, and therefore the pleasure, of the game, while decreasing the strain on the players´ wrists. OMETTI single color in plastic material (moplen) representing a stylized human figure, fixed to the rods with direct molding: they do not move, they do not move, they perfectly maintain their position. The colors of the teams are coordinated with the color of the furniture: little men red and yellow with the red furniture, white and blue with the blue football table. PLAYING FIELD in plastic laminate glued on the base with special non water-soluble glues. The white lines that reproduce the ground of the stadium are screen-printed with special water-resistant inks: they do not fade in the sun and are not afraid of humidity. The color of the playing field varies according to the color of the furniture: it is grass green with white serigraphs on the red model, light gray with dark blue serigraphs on the blue model. - All the bolts, screws and nuts used are subjected to a tropical anti-rust treatment. - Introduction of balls into the field through two unions on the sides of the table football. - The recovery of the balls in goal, simple and immediate, is done manually through two portholes placed behind the doors. - Abacus scoreboard, with cubes in colors coordinated with the cairns. Supplied with each football table 10 Standard model balls. The color of the balls varies according to the playing field: white ball on the green grass, orange - for better visibility - on the gray playing field. Protective cover supplied as standard.